Electronic Components

RTD temperature sensor applications: baked oven, Steam oven,Grill,Industrial Oven, Air compressor, Temperature-measurement Instrument, Heat meter,New energy motor

The precision of each pair of temperature probes after pairing may meet the error of 0.1°C, and each pair of temperature sensors for the heat meter series industrial temperature sensors confirms to the criteria of Chinese standard CJ 128-2007 and European standard EN 1434 in terms of error range. To avoid MIS installation due to the length of the cable, the two ends of the probe are each marked with a red and blue marker. Upper water is at the red end, while lower water is at the blue end.

The product has excellent characteristic stability and consistency, high-temperature measuring accuracy, wide temperature measurement range, good moisture resistance, and high reliability.

The platinum resistance sensor uses two-wire or three-wire silver-plated Teflon wire, which offers high-temperature measurement precision and strong dependability.

Thermocouple is a commonly used temperature sensor, which is widely used in industrial control, scientific research equipment and other fields.

Thermocouple temperature sensors are one of the common types of sensing elements used to measure temperature in industrial applications.

The most often used temperature sensors are thermocouple devices. This is due to the fact that thermocouples exhibit steady performance, a broad temperature measuring range, long-distance signal transmission, etc. They also have a straightforward structure and are simple to operate. Thermocouples make display, recording, and transmission simple by directly converting thermal energy into electrical impulses.

The DS18B20 output signal is stable and does not attenuate over long transmission distances. It is suitable for long-distance multi-point temperature detection. The measurement results are transmitted serially in the form of 9-12-bit digital quantities. It has the characteristics of stable performance, long service life, and strong anti-interference ability.

The DS18B20 output signal is stable and does not attenuate over long transmission distances. It is suitable for long-distance multi-point temperature detection. The measurement results are transmitted serially in the form of 9-12-bit digital quantities. It has the characteristics of stable performance, long service life, and strong anti-interference ability.

The temperature readings from the DS18B20 temperature sensor are 9-bit (binary), suggesting that the device's temperature data is either sent to the DS18B20 temperature sensor via the single-line interface or that it is sent out from the DS18B20 temperature sensor. As a result, just one line (plus ground) is required to connect the host CPU to the DS18B20 temperature sensor, and the data line itself can act as the sensor's power source in place of an external power source.

The DS18B20 is a popular digital temperature sensor with the features of small size, minimal hardware overhead, strong anti-interference capabilities, and high precision. It outputs digital signals. The DS18B20 digital temperature sensor is simple to wire and is packaged in a variety of ways, including pipeline, screw, magnet adsorption, stainless steel, and numerous model options.